Steel Elbow,Steel Tee,Steel Cap,Stainless Steel Fastener,India

Profile

Riddhi Siddhi Steel Corporation has a depth of technical and managerial expertise carefully nurtured since 1980. A reputation for reliability and a defined business focus has forged the organization into the realm of manufacturing, importing as well as stocking of steel products like steel elbow, steel tee, steel cap, stainless steel fastener etc. We procure our products from various reputed companies of Japan and Europe and also from indigenous manufacturers like Tata, Indian Seamless, Maharashtra Seamless, Sail and Jindal. Today our success knows no boundaries and this has been made possible due to ongoing alignment with international best practices and a comprehensive understanding of the ferrous and non ferrous business environment.

We have set clear goals for ourselves as we enter the next phase of our journey towards transformation. We believe that we are well equipped to realize key objectives and to meet whatever challenges the future may bring. We use both objective and subjective criteria to measure our ability to create value. Our financial strength is underscored by low cost of production and ownership of iron ore resources, as well as the company’s strong position in the domestic market.

Product Profile

We have designed and developed products which fulfill the various industrial requirements and are also cost effective as well as durable. All our products are designed with excellence and under strict supervision of technical experts. Our product range includes steel pipes, steel tubes, steel elbows, steel tees, steel reducers, steel caps, steel stub ends, flanges, fasteners, steel sheets and steel plates. Our products are well known for various specialized features like:

• Corrosion resistance
• Minimal maintenance
• Resistant to tension and compression
• Hard and durable

All our products are made using stainless steel, carbon steel, mild steel and alloy steel. As pet the needs of our customers we also procure and supply the material manufactured by reputed companies from Japan and Europe and from indigenous manufacturers from Tata, Indian Seamless, Maharashtra Seamless, Sail and Jindal.

Warehouse

We have a spacious warehouse which is spread in a wide area. Our warehouse is segregated and the ferrous and non ferrous products are stored as per their usage and industrial needs. Fitted with temperature maintaining devices all the chemicals are properly checked under the supervision of chemical experts who know the process of storing. Our warehouse is managed and handled by warehouse experts and store keepers who know the exact process of storing and maintaining the products so that their features can easily be maintained.

Clients

The technology we have developed and our investments in equipment give us unrivaled experience and capabilities. For the most demanding applications, we constantly check the tolerance levels of all products for durability and outstanding quality. All our services can be combined to help assist the organization to manage the supply chain from design through production. Our customers have grown accustomed to our outstanding standards for quality, reliability and unparalleled value. The close relationship that we maintain with our customers has helped us to understand their specific requirements and serve them in the best possible way. Through our superior services and high quality products, we have gained good reputation among our clients and strive to upkeep the same and reach for new horizons.

Manufacturing Facility

We incorporate state-of-the-art infrastructure coupled with innovative and cutting edge technology. We constantly invest in the technological up gradation to remain abreast of latest market trends. Our infrastructural set up includes sophisticated machines which are highly efficient and can manufacture equipment according to the required technical specifications. Our production unit is equipped with machines like:

• Automatic cutting machine
• Deburring machine
• CNC machine
• Lathe machine
• Drilling machine

We have installed the most modern machinery and trained work force to ensure quality, dimensional accuracy and alignment. Each and every equipment is made with attention to intricate details so that they are in accordance with the international standards and fulfill the purpose they are meant for. The basic concept established here is to create an optimum production environment using our own original production technology.

Vendor Base

We have created a wide vendor base through our tie ups with reputed manufacturers. It is with the assistance of this association that we can easily and efficiently meet the urgent requirements of our clients within the shortest possible time frame. As a stockist and importer of ferrous and non ferrous products we procure them from Japan & Europe and also from indigenous manufacturers from Tata, Indian Seamless, Maharashtra Seamless, Sail and Jindal. Our vendor base is highly organized and we work in close association with them so that the latest technology can easily be imbibed by us and we supply the best products to our clients.

Certification & Supplementary Test

Fittings supplied to the QAP are supplied with test certificate. Test certificate incorporates, Chemical, Mechanical and Hardness properties, also it gives details of Heat treatment, Hydro test pressure, supplementary test and stamping details. Additional information and test data is furnished as per customer requirement.We are known for our quality products in India and Overseas. We follow a strict quality management policy which is set out by our quality inspectors. They have framed out certain quality policies and guidelines which are followed by our manufacturing unit right from procurement of raw materials to final production stage. Our commitment to Quality and deep insight into the customers requirement makes us one of the very few companies delivering such premium quality equipment.

All our Quality Assurance plans are prepared in accordance with specific requirements stated by the customer are respective ASTM specifications. Mandatory and supplementary requirements are translated to special instructions and audits performed during manufacture and inspection.

Inspection stages and check hold points are decided to carry out in process inspection and record important stages of inspection and tests. A separate Quality Assurance / Control Department functions under the control of management, independent of production. The Quality Assurance Department oversees all important quality functions and performs the following activities:

Material Control System: This system controls the quality of all incoming material. The incoming material specifications are co-related with raw material test certificates. The checks and test are documented. The material is given internal control No. and same is recorded for future reference.

Process Control System: During forming, Forging and Heat treatment, process control system outlines in process checks and controls are followed during heat treatment and testing. Forging and interim heat treatment in the process control reduces the chances of introduction of variables in the process. Each lot of fittings as defined in ASTM specifications are subjected to heat treatment and testing. Testing is performed in accordance with specification requirements. Test data is evaluated by

Thus every product which comes out of our manufacturing unit passes through stringent quality control adhering to international quality standards. To verify that the supply made to our clients exact specifications, our quality control team combines technical expertise, knowledge of industrial standards and the latest inspection tools and machines to meet all requirements. Particular attention is paid to high quality, tolerance and traceability. Efforts are continuously made to manufacture ferrous and non ferrous products that can flawlessly meet the varied industrial requirements.

Quality Assurance

We are known for our quality products in India and Overseas. We follow a strict quality management policy which is set out by our quality inspectors. They have framed out certain quality policies and guidelines which are followed by our manufacturing unit right from procurement of raw materials to final production stage. Our commitment to Quality and deep insight into the customers requirement makes us one of the very few companies delivering such premium quality equipment.

All our Quality Assurance plans are prepared in accordance with specific requirements stated by the customer are respective ASTM specifications. Mandatory and supplementary requirements are translated to special instructions and audits performed during manufacture and inspection.

Inspection stages and check hold points are decided to carry out in process inspection and record important stages of inspection and tests. A separate Quality Assurance / Control Department functions under the control of management, independent of production. The Quality Assurance Department oversees all important quality functions and performs the following activities:

Material Control System: This system controls the quality of all incoming material. The incoming material specifications are co-related with raw material test certificates. The checks and test are documented. The material is given internal control No. and same is recorded for future reference.

Process Control System: During forming, Forging and Heat treatment, process control system outlines in process checks and controls are followed during heat treatment and testing. Forging and interim heat treatment in the process control reduces the chances of introduction of variables in the process. Each lot of fittings as defined in ASTM specifications are subjected to heat treatment and testing. Testing is performed in accordance with specification requirements. Test data is evaluated by QA department and recorded in appropriate format, supplementary test like radiography, ultrasonic, corrosion testing etc., is done as per code guide lines.

Machining and Dimensional Control: Suitable fixtures and templates are used to maintain dimensional accuracy. Necessary gauges and callipers are calibrated periodically to maintain their accuracy.

Finishing Painting & Marking: Carbon and alloy steel fitting are shot ballasted or pickled and painted. Stainless steel fittings are pickled and passivated. All fittings are marked with size, schedule, specification and manufacturer stamp. Equipment calibration and audits are done as per quality plans.

Team

The retention of high quality personnel and their development through comprehensive organizational planning remains the cornerstone of the company’s personnel management. Closely aligned with this is the implementation of a performance driven culture that enables staff to maximize their outputs to the best of their respective abilities.

Our team works in complete coordination and harmony with all the departments and units by using their skills and gained expertise. We also have an R&D team which constantly engages in research to manufacture better and innovative products. To ensure that staff realize their full potential the organization provides a supportive infrastructure allowing participative target setting, decision-making and equitable, performance based remuneration. An integrated performance-reward system measures performance results and allocates commensurate compensation as part of a total reward culture.

Industries Served

We serve various industries with our superior quality products. These industries widely demand our products and they are also durable and complete precise. The industries served by us include:

• Petrochemicals
• Fertilizers
• Refineries
• Pharmaceuticals
• Heavy Engineering
• Ship building
• Dairy Plant
• Power Plant
• Atomic Research Institute

Stainless Steel Fasteners

High-Performance Metal Alloys

Sheets, Plates & Coils

High Nickel & Chromium Alloy Pipe & Tube Fittings